In short
- Check whether the weapon can target the enemy before comparing its damage multiplier.
- The penetration bonus adds to the multiplier: +30% raises the flak damage multiplier against a destroyer from 0.1× to 0.4×, rather than 0.13×.
- Reduced Armor gives attacks against the target +20% armor penetration (+0.2 to the multiplier); Increased Armor gives −15% (−0.15).
- The penetration multiplier is capped at 2×. Damage effects still change the result after that.
Scheme
Example without armor effects or other damage changes; the bonuses are illustrative.
How it works
- Base damage by target
Ordinary weapon multipliers, before extra penetration and armor effects:
Damage type × ship class Damage type Fighter Corvette Frigate Destroyer Cruiser Flak 1× 0.65× 0.65× 0.1× 0.1× Missile 0.8× 0.7× 0.7× 0.2× 0.1× Turrets 0.5× 0.5× 0.5× 0.5× 0.5× Beam 0.33× 0.33× 0.83× 0.83× 0.83× Torpedo 0.2× 0.2× 0.2× 1× 1.5× Normally beams cannot select fighters or corvettes; torpedoes cannot select fighters, corvettes or frigates. To select these smaller targets automatically, the target restriction must be lifted. Individual weapons can have narrower target lists.
- Add penetration
Penetration multiplier = base multiplier + extra penetration
The ship’s bonus and the extra penetration of the hit are combined first, with a lower limit of zero and an upper limit of 99%. The flak penetration effect then adds another 20% for flak weapons (+0.2 to the multiplier).
- Then apply armor effects
Reduced Armor gives attacks against the target +20% armor penetration (+0.2 to the multiplier); Increased Armor gives −15% (−0.15). If Increased Armor applies, the multiplier cannot fall below 0.01×. Finally, it cannot exceed 2×.
These are changes to the multiplier. They are not the same relative damage increase for every weapon and target.
- Target access is a separate rule
- More penetration does not add targets. Modules of a completed set, or technologies, can extend the target list of beams or torpedoes, but the fleet’s target prohibitions still apply.
- Limits of this calculation
- Against a boss the starting multiplier is 0.5, replacing the ordinary matrix. Source and target damage effects, and damage against the target’s species, multiply the result after penetration. This page does not calculate final damage in a battle.
An example
- The same bonus has different relative value
Add 30% armor penetration (+0.3 to the multiplier) to flak weapons. Against a destroyer the multiplier rises from 0.1× to 0.4×: 4 times as much. Against a fighter it rises from 1× to 1.3×: 1.3 times as much.
If the damage before this multiplier is 100, the destroyer takes 10 without the bonus and 40 with it, holding all other factors constant.
- With Increased Armor
- Flak against a destroyer starts at 0.1×. With no penetration bonus, Increased Armor takes it to the floor of 0.01×. Adding +15% armor penetration (+0.15 to the multiplier) restores 0.1× before other effects.
Where it matters
- Protection and effects
- Shields separates shield creation and recovery. Accuracy and resistance explains the negative-effect check.
- Choose weapons for the target
- All ships and tier list helps you choose a squadron. Read its page for abilities and target restrictions. Damage type alone does not describe the whole squadron.
- Read the rest of the battle
- Battle effects: who applies what covers armor changes. Accumulated damage covers how a pause in firing changes later shots.
- Armor penetration from officers
- Officers can add armor penetration; matching their ship conditions gives the full bonus.
- Where next
- Beginner guide shows where to start. Events: what you can get leads to the event guides; each ship’s page lists its source.
Game version 1.46.2.
Found a mistake or something missing? Tell us